user_974580 (20)
-8 circuits
-5/16” diameter solid copper bolts
-Solid copper bus bar 1/4" x 2" x 5 1/2"
-Mounted on bakelite plate: 4” x 6 ½” x 3/8”
-New conditi...
Vented loop for 1 1/2" hose.
Made by Forespar of Marelon
New, never installed.
An integral air vent in the loop automatically prevents back siph...
Heavy Duty spinnaker pole slider for 1 ¼” t-track
Made of investment cast stainless steel
Ring just under .500" in diameter.
Spring pin that locks ...
Two Backing Plates for Andersen 40 winches, self-tailing or non self tailing.
Custom made of marine grade aluminum, 3/16” thick.
100 mm bolt circle,...
Works with Standard Horizon GPS CP 155C, CP175C, and CP1000C. May work with other units.
This is the “smart antenna” where a portion of the GPS’s br...
Functional and looks good in the galley or head.
16 inches x 3 inches by 1 3/4 inches.
Nicely made by Seateak.
New, never used.
Compare with $70...
Dynaline Cable cutters.
Aluminum drop forged handles and heat treated blades.
Capacity: up to 5/8" diameter’
23" overall length’
Used for:
-gen...
Low drag folding prop
This shape has more blade area than the Martec elliptical style
Motors better and unfolds more reliably
1 inch bore
Right ha...
Two Barient 21 2 speed winches
Base: 5 ½ inches
Height: 5 ½ inches
Drum diameter: 2 ¾ inches
Drum material: Anodized Aluminum
Rope friction s...
Add light and fresh air to head, stateroom, quarterberth, etc.
Small size: cut out is 250 x 250 mm (9.8 x 9.8 inches)
Overall size is 305 x 305 mm ...
Turned clear teak
36 inches long
1 ½ inches mid height
1 ¼ inches at base
Cast aluminum base and mounting hardware included
In as new condition
Large collection of signal flags and pennants.
These flags are the real deal.
Full size format with rope lanyards and cast bronze brummel hooks.
Pr...
Well built jib/genoa in as new condition
Luff: 36.25 feet
Foot: 16.75 feet
Leech: 28.25 feet
Sewn leather on tack, clew, and head
Whipping aro...
Rule 1300 gph bilge pump
New, never installed
7.5 amp motor
Jabsco bilge pump level switch
15 amp rated
Turns on at 2 1/4” water level. Turns o...
ATN Spinnaker sleeve takes the drama out of hoisting and dousing spinnaker.
Makes short-handed flying of spinnaker easier and safer.
Works with symm...
3 blade bronze propeller
Use on sailboat or powerboat
Diameter: 14 1/2”
Pitch: 15”
Rotation: Right hand
Bore size: 1” tapered bore
Brand: M...
2 blade bronze sailboat propeller
Diameter: 15 ”
Pitch: 12”
Rotation: Right hand
Bore size: 1” tapered bore (Sleeved from 1 1/4”)
Brand: Fed...
2 blade bronze sailboat propeller
Diameter: 15 ¼”
Pitch: 14”
Rotation: Right hand
Bore size: 1” tapered bore
Brand: Michigan Sailor
Conditi...
Open/Close Knob for Atkins and Hoyle Hatch
New, never installed.
These corrode and require replacement.
Found on many brands of boat, including C&C...
2 blade bronze sailboat propeller
17 inch diameter
13 inch pitch
Left hand rotation
1 inch bore
Very nice shape
No corrosion
Carry a spare if y...
user_974580
user_974580