$500 · Klipsch RF-3 II Speakers & Paradigm PW-2200 Subwoofer

Klipsch RF-3 Series II Speakers Titanium dome 1" tweeter loaded with a 90° x 60° Tractrix horn matched to 2 (8") aluminum membrane bass-reflex loaded woofers. Very high sensitivity at 98 dB/w/m which means that - with just one watt from your amplifier - they produce 98 dB of sound pressure at 1 meter, exactly the same pressure your common loudspeakers (88 dB average sensitivity) would produce with 10 watts, that is, a power ten times higher. The crossover network frequency is located at 1975 Hz. - Dimensions: 98 (H) x 23 (W) x 41 (D) cm [38.5" x 9" x 16.2"] - Weight 25 kgs (56 lbs) each - Frequency response: 37-20,000 Hz @ +/- 3 dB - Nominal impedance: 8 ohm - Average sensitivity: 98 dB/w/m - Max power allowed: 150 watts RMS (continuous power) and 600 watts (peak) ____________________________________________________________________________ Paradigm PW-2200 Subwoofer - Design: Single driver, bass reflex, high-velocity low-turbulence resistive port, built-in Ultra-Class-D™ amplifier - Amplifier: High-Current, Discrete Output: 400 watts RMS† (20–150Hz @ < 0.1% THD) 1500 watts Peak†† - Amplifier Design Features: Auto-On / Off, soft clipping - Bass Driver: 5-mm (12 in) RCR™ mineral-filled co-polymer polypropylene cone. 51-mm (2 in) bifilar 2+2 layer voice coil, dual spiders, AVS™ die-cast heatsink chassis. - Low Frequency Extension: 18Hz (DIN)* - Subwoofer Cutoff Frequency: Variable 50Hz – 150Hz - Sub./Sat. Phase Alignment: Variable 0º – 180º - Line Level Input: From Sub-Out / LFE-Out of receiver / processor, or other line level source - Line Level Input Sensitivity: 100 mV stereo; 200 mV mono - Line Level Input Impedance: 15 k ohms - Line Level High-Pass Output: To left / right of amplifier input or left / right Main-In of receiver - Line Level High-Pass Output Roll-Off: 3rd-order 18 dB / octave at 80 Hz - Internal Volume: 79.5 L / 2.81 cu ft - Height, Width, Depth: 49.5 x 41.9 x 57.8cm 19-1/2 x 16-1/2 x 22-3/4in - Weight: 31.4 kg / 69 lb